Forming Concrete Timber Beam Slab Formwork / Scaffolding System Flex-H20 slab formwork is also designed for slab concrete. It can be used in those area where the table formwork does not work, such as basement slab, very complicated floor plan with circular slab edge or complex beams, etc. Flex-H20 ... 자세히보기
H20 Concrete Wall Formwork Systems and Column Forming systems High flexibility with a few main components can meet any construction requirements. Timber beam H20, steel waling, plywood and clamp etc.. These components can be combined for all shapes, even with the restructuring of wall formwork units ... 자세히보기
Push-pull Metal Props for Scaffolding Shoring in Formwork Construction Light weight scaffold post shores are used for supporting work in building slab construction, with working height range from 0,50-0,80 m upto 3,00-5,50 m. Two end plates, upper and lower plates, help hold and stablize the post ... 자세히보기
Scaffolding Adjustable Screw Base Jack & U-Head Jack Base for Ringlock System Made from high strength steel pipes, screw jack bases are equipped with 150 x 150 mm swivel base plate to support and stabilize scaffoldings in construction. It can fit all types of scaffold systems, such as frames, ... 자세히보기
Scaffolding Tripod for Stabilizing Adjustable Steel Props The flexible folding tripod makes it easier to set up the steel props during slab formwork system erection. The prop is simply set in the open stand and secured with the clamping hook with a gentle blow of the hammer. The tripods can be used ... 자세히보기
H20 Beam Formwork For Concrete Walls And Columns Upto 6 Meters Height HORIZON's H20 beam formwork consists of H20 wooden beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m. ... 자세히보기
Formwork Tie Rod For Construction , Dywidag Thread Bar 145KN Load Formwork tie rod performs as the most important member in tie rod system, holding formwork panels. Usually used together with wing nut, waler plate, water stop, etc. Also it is enbeded in concrete used as lost part. Tie rod diameter ... 자세히보기
Metal Tubular Picket Fencing Systems For Wall and Gate Security Picket Fencing panels are made of horizontal rails, vertical pickets and posts, with pickets evenly spaced and attached on rails. The panel is equipped with sharp headed pickets welded into rails and secured to posts with tailor-made ... 자세히보기
